Meridian America 541 - Manual (Page 28)

Defining your own presets
22
Changing the preset parameters
Each preset provides a series of parameters which you can vary
to customise the behaviour of the preset to your specific
requirements. For example, most presets provide a Delay
parameter, to allow you to specify the delay applied to the rear
surround speakers in order to change the spaciousness of the
sound.
You can save the changes you have made to a preset so that
you can use the same settings whenever you want. You have a
choice of saving changes to the built-in preset, or you can
create a new preset with a name of your choice. User-defined
presets appear in the list of presets after the built-in ones.
The following table shows the parameters available for each
preset, and their standard values:
Parameter Range Default What it changes
Balance -10 to +10 0 The L-R balance.
Rear -30dB to +10dB +0 The relative level of the surrounds.
Delay 0 to 30.0 ms 25.0 The spaciousness of the surrounds.
Centre -3.0dB to +3.0dB 0 The integration of the centre speaker.
Sub -10dB to +10dB 0 The relative level of the subwoofer.
OSD Off, Low, Med, High Low The position of the on-screen display.
Stereo only provides the parameters Balance, Sub, and OSD.
Mono only provides the parameters Sub and OSD.