Choosing standard settings, Meridian 200 mode, Standard settings – Meridian America 541 User Manual
Page 42: Types
Configuring the surround controller
36
The 541 Surround Controller provides seven alternative standard
settings, called Types, which configure all aspects of the
surround controller into the most commonly needed
configurations.
Choosing one of the standard settings overrides any other
configuration you may have performed, and so can be used to
reset the configuration of the unit.
For details of the different loudspeaker layouts see Sample
The Type you choose depends on the following aspects of your
system:
❍ The layout of loudspeakers in your system.
❍ Whether you are using the earlier Meridian 200 Series units.
❍ Whether you want to use a subwoofer for all presets, or just
for the cinema presets.
The types are explained in the following table:
Choosing standard settings
Type
Main-L
Main-R
Centre
Surround-L
Surround-R
Sub
Notes
1
●
●
●
●
●
●
2
●
●
●
●
●
●
200 mode
3
●
●
●
4
●
●
●
●
5
●
●
●
●
●
6
●
●
●
●
●
●
Subwoofer for cinema presets
7
●
●
●
Second room
A duplicate set of types configure input A1 for LP rather than Tape 1, for use if you have a phono module.