Meridian America 541 - Manual (Page 46)

Configuring the surround controller
40
To specify the speakers to use for
music presets
If your centre speaker and/or subwoofer are of lower quality than
your main left and right loudspeakers, you may prefer to use
them for only for home cinema, but not for music.
● Press > or < until you see a
display such as:
Music Cen? Y
● Press A or V to change the option between Y and N, to
specify whether to use the centre speaker for the music
presets.
● Press > or < until you see a
display such as:
Music Sub? Y
● Press A or V to change the option between Y and N, to
specify whether to use the subwoofer for the music presets.
To specify other options
The more advanced options are summarised in the following
table:
Option Initial Value
Communications mode
(500 Comms or 200 Comms)
500 Comms
Controller mode (Auto Setup,
Controller, or Not Con.)
Auto Setup
System address (1 to 8)
Sys.Addr.= 1
Product address (1 to 8)
Prod.Addr.=1
Volume control (Main Volume,
2nd Volume, or No Volume)
Main Volume
Copy address (1 to 8)
Copy Addr.=2
Remote displays (Off or On)
Displays Off