Multi-Tech Systems FAX FINDER FF220 User Manual
Page 65
Chapter 4: FaxFinder Client Software Configuration
Multi-Tech Systems, Inc.
FaxFinder Admin User Guide
65
Disassociating the Client from a Specific FaxFinder
Unit
In this procedure, you will un-do the procedure “Associating Client with a Specific FaxFinder Unit.” This
situation might occur when changes are being made in the network faxing system. In any event, this
procedure severs the tie between your PC and a specific FaxFinder unit so that you will no longer be
connected to it for sending fax messages. (Faxes can be received in email form from the FaxFinder
server, despite disassociating from the FaxFinder server, as long as the receiving party is entered in the
FaxFinder Phone Book.) In cases where the client is currently associated with more than one FaxFinder
unit, you will need to know the IP address of the specific FaxFinder unit from which you want to
disconnect.
1. Open the FaxFinder Client Software program and go to the Device Status tab. Select the
FaxFinder unit from which you want to disconnect (you can identify the FaxFinder unit by its IP
address or domain name). Right-click on it and select delete.
2. Your FaxFinder Client Software will no longer be able to send faxes through this particular
FaxFinder unit.