Technical specifications – Multi-Tech Systems FAX FINDER FF220 User Manual
Page 7
Chapter 1: Product Description and Specifications
Multi-Tech Systems, Inc.
FaxFinder Admin User Guide
7
Technical Specifications
The FaxFinder models meet the following specifications:
FF120/220 FF420/820
Connectors
RJ11 Line Jacks (1 or 2), Console
Serial Port for RJ45-to-RS232
configuration/debug connection,
Ethernet RJ48 connector, and
Locking Screw on the Power Jack.
RJ11-Line Jacks (4 or 8), RJ45 -
Ethernet Jack
Size
6.4” W x 6.0” L x 1.2” H
16.3 cm x 15.2 cm x 3.0 cm
17.3” W x 1.7” H x 8.4” L
43.9 cm x 4.3 cm x 21.3 cm
Weight
20.5 oz. (750 g)
7.4 lbs. (3.4 kg)
Power Consumption
Typical: 4.05 W (0.450A@ 9V)
Maximum: 5.31W (0.590A @9V)
100 -240 VAC, 1.2 – 0.6A,
50/60Hz
Typical 3.75W (0.750A @5v DC)
Maximum 7.7W (1.4A @5.5v DC)
Operating
Environment
32°-120° F (0°-50° C)
relative humidity 20 to 90%
noncondensing
32°-120° F (0°-50° C)
relative humidity 20 to 90%
noncondensing
Storage Temp.
-10° to +85° C
-10° to +85° C
EMC Approvals
FCC Part 15 Class A, Canada
Class A, EN 55022:1998 Class A,
EN55024: 1998
FCC Part 15 Class A, Canada
Class A, EN 55022:1998 Class A,
EN55024: 1998
Safety Approvals
cUL/UL60950-1, EN60950-1,
AS/NZS60950:2000
cUL/UL60950-1, EN60950-1,
AS/NZS60950:2000
Telecom Approvals
FCC Part 68, CS03
FCC Part 68, CS03
Data Modem Specs
ITU-T V.92/V.90/56K (-92 build
option), V.34/
33.6K V.32bis/14.4K V.22bis/2400
baud
V.22, V.23, & V.21; Bell 212A & Bell
103
V.44 Error Correction
V.42 LAPM, MNP 2-4 Error Correction
V.42bis & MNP Class 5 data
compression
ITU-T V.92/V.90/56K (-92 build
option), V.34/
33.6K V.32bis/14.4K V.22bis/2400
baud
V.22, V.23, & V.21; Bell 212A & Bell
103
V.44 Error Correction
V.42 LAPM, MNP 2-4 Error Correction
V.42bis & MNP Class 5 data
compression
Fax Modem Specs
ITU-T V.34 (MT5634SMI)
ITU-T V.17, V.29, V.27 & V.21 Ch. 2
Telephony/TAM
V.253 commands
2-bit & 4-bit ADPCM, 8-bit linear PCM
& 4-bit IMA coding
8kHz sample rate
Concurrent DTMF, ring, & U.S. Caller
ID detection
ITU-T V.34 (MT5634SMI)
ITU-T V.17, V.29, V.27 & V.21 Ch. 2
Telephony/TAM
V.253 commands
2-bit & 4-bit ADPCM, 8-bit linear PCM
& 4-bit IMA coding
8kHz sample rate
Concurrent DTMF, ring, & U.S. Caller
ID detection