Memorex MPH6929 - Manual (Page 11)

Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
• Use caution when installing or modifying telephone lines.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a deskor table, wrap the power cord around the
strain relief notch on the bottom of the base.
ADAPTER SAFETY FEATURES
If the AC adapter furnished with this phone has a polarized line plug (a
plug having one blade wider than the other), this plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into
the outlet, try reversing the plug.
Do not alter the shape of the blades of the polarized plug!
NOTE: If you cannot plug the
AC adapter into the outlet,
contact someone about
replacing the outlet.
Plug the AC Adapter into a
standard 120 V AC wall outlet.
Do not use an outlet controlled
by a wall switch. Use only the
AC Adapter supplied with
this phone.
6
Before using your phone,
fully charge the Nickel-
Cadmium battery packfor
15-20 hours.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed and
create an electrical hazard
or fire.
AC
ADAPTER
Wide
Blade
INST
ALLIN
G
AND
ADJUSTIN
G
F:...MPH6929ENG.VP
Thu Jun 14 15:47:03 2001
Color profile: Disabled
Composite Default screen