Memorex MPH6929 User Manual
Page 14
5) Plug one end of the telephone
cord into the
TEL LINE
jack
on the backof the base, then
plug the other end into a
standard telephone jack.
6) Line up the mounting slots on
the base with the mounting
posts on the wall, then push
in and down until
the phone is firmly seated.
7) On the base unit, pull the handset
retainer out of the slot and rotate
it clockwise 180 degrees.
8) Flip the retainer from front to back,
then slide it backinto the slot so
that the lip of the retainer faces up
and the oval is at the bottom of the
retainer. This will hold the handset
in place.
9
DO NOT use an outlet
controlled by a wall switch.
Before you plug the other
end of the telephone cord
into the modular jackon
the wall, charge the battery
(refer to “Charging the
Battery Pack,” page 12).
F:...MPH6929ENG.VP
Thu Jun 14 15:47:14 2001
Color profile: Disabled
Composite Default screen