Memorex MPH6929 - Manual (Page 23)

▼
One-touch priority dialing
Your phone is equipped with three “One-Touch Priority” keys for
instant dialing. You cannot store phone numbers directly into
M1
,
M2 or M3 . They are only used to dial phone numbers stored into
memory locations 1, 2 and 3. (See “Storing a Phone Number in
Memory,” page 17.)
To instantly dial phone
numbers stored in memory
locations 1, 2 or 3, simply press
M1
,
M2
or
M3
. (There is no
need to press talk; the phone
will automatically dial.)
If you press M1 , M2 or M3 , and no phone number was stored in
memory locations 1, 2, or 3, the phone will beep rapidly but will not
dial.
CHAIN DIALING
On certain occasions after dialing a number, you may be requested to
enter an access code, such as your account number. You can enter this
number into a memory location for later use by doing the following.
1) Store the access code into one of the memory locations (0-9) or
memory keys
M1
,
M2
, or
M3
following the steps above.
2) Dial the party or service main number.
3) When you need to enter the special number, press
mem
followed by
the memory location (0-9) or memory keys
M1
,
M2
, or
M3.
ERASING A STORED NUMBER FROM MEMORY
1) Remove the handset from the base unit.
2) Press the
MEM
button twice.
3) Press the memory location (0-9). A tone indicates that the stored number
is erased from memory.
18
USIN
G
Y
OUR
PHONE
An error sounds and the
erase procedure will be
canceled if more than 20
seconds elapse between
each keystroke.
F:...MPH6929ENG.VP
Thu Jun 14 15:47:35 2001
Color profile: Disabled
Composite Default screen