Memorex MPH6929 - Manual (Page 26)

TURNING THE ANSWERING SYSTEM ON/OFF
1) To turn the answering system on,
press
answer on/off
. A beep
tone will sound and the current
outgoing message will play on the
base speaker. A beep tone will
sound after the outgoing message
plays. The message counter LED
lights to indicate that the unit is
ready to answer calls.
2) To turn the answering system off, press
answer on/off
again. A beep
tone will sound followed by the announcement “Answer off” and the
message counter LED will go out.
SETTING THE CLOCK
The clockon the MPH6929 Answering System starts when power is
applied to the base. Follow these steps to set the clockto the
correct time:
1) Press and hold
clock
until a beep
tone sounds.
2) Next, press the
skip
or
repeat
key until the correct day is
announced. (Numbers zero
through six display on the base as
each day is announced.)
3) Press
clock
again to select the day.
21
Press skip or repeat
multiple times to scroll
through days, hours,
minutes, etc.
If you make no entries
within two minutes, the
system returns to standby.
Adjust the volume of the
system’s announcements
by pressing ▲ for louder
or ▼ for softer on the
base speaker.
F:...MPH6929ENG.VP
Thu Jun 14 15:47:40 2001
Color profile: Disabled
Composite Default screen