Setting the pulse/tone switch, Adjusting the ringer controls – Memorex MPH6929 User Manual
Page 19
SETTING THE PULSE/TONE SWITCH
Be sure the
PULSE/TONE
switch is in
the
TONE
position unless your local
phone system uses pulse dialing.
ADJUSTING THE RINGER CONTROLS
▼
Handset ringer tone and ringer volume
When the phone is in standby mode, pressing the
volume
key on the
handset selects the handset ringer volume and tone. There are two
ringer tones each with two volume levels; high
and low.
▼
Handset earpiece volume
The handset earpiece volume settings (Normal, High and Loud) can only
be adjusted during a call. Press
volume
to select Normal, High, or Loud.
When you hang up, the phone keeps the last
volume
setting selected.
▼
Base unit ringer on-off
To turn the base ringer on, select the
RINGER ON
position. To turn the
base ringer off, select the
RINGER OFF
position.
14
INST
ALLIN
G
AND
ADJUSTIN
G
Most phone systems use
tone dialing. Checkwith
your local phone company
if you’re not sure whether
your system is tone or pulse.
F:...MPH6929ENG.VP
Thu Jun 14 15:47:28 2001
Color profile: Disabled
Composite Default screen