Operation, Stove controls, Vermont castings resolute acclaim – Majestic Appliances 2490 User Manual

Page 17

Advertising
background image

17

Vermont Castings Resolute Acclaim

2000893

Stove Controls

Two Controls Operate the Stove

The primary air control lever, located beneath the
ashlip, regulates how much heat the stove produces by
controlling the amount of air received by the fire. The
more air supplied, the hotter the fire. (Fig. 27)

With a travel range of about 6", the air control is
closed when the lever is fully left. Maximum heat is
produced when the lever is fully right. It may also be
set anywhere between a "start-up" position and the
high and low extremes to achieve a desired heat
output. A directional arrow cast into the Acclaim's ash

Operation

lip serves as a reminder of the correct "open" and
"closed" positions.

The damper handle is located on the right side of the
stove and controls air flow within the stove. (Fig. 27)
The damper is open when the handle is toward the
rear of the stove, and the combustion gases exit
directly out the flue collar. When the handle is pulled
forward and locked, the damper is closed, secondary
combustion occurs, and the stove operates most
efficiently.

The damper must be fully open or fully closed. There
are no intermediate positions for the damper handle.

You will need the following tools to assemble the
Acclaim:
• 9/16" open end wrench • safety glasses & gloves
• flat head screwdriver

• power drill w/ 1/8" (3mm) bit

• stub handle phillips screwdriver

Unpack the Stove

1. Remove the shipping straps and plastic wrap.
2. Inspect the stove and contents for shipping damage

or missing parts. Immediately notify your dealer of
any damage. Do not install this stove if any damage
is evident or any parts are missing.
Hardware Bag contents:
• Stove Legs, 4
• 3/8-16 x 1

¹⁄₄

” hex head Leg Bolts with washers, 4

• Owner's Registration Card
• Touch-up Paint (Porcelain enamel stoves)

Install Stove Legs

Remove and discard the four large slot-head screws
from the stove bottom. Install the stove legs using the
hex head bolts from the parts bag. (Fig. 26a) Use 3/8”
washers with all four legs. Tighten the bolts firmly.
CAUTION: Overtightening can strip tapped threads.

Leg Bolt and
Washer

Leg Leveller

ST466

Fig. 26a Attach stove legs and leg levellers.

Two Ways To Add Logs

And A Choice Of Fire Views

Convenient top-loading of wood through the Acclaim’s
stovetop griddle supplements traditonal fireplace-style
loading through the front door.

The griddle simply lifts to open.

The front door employs a rotating cam and a door latch
tab to secure it. The handle points down when the
door is closed.

To open the front door,

pull on the handle to release

the cam. To close it, push the door until the latch
engages. Double-check the latch by pushing lightly on
the handle. When the latch is properly secured, the
door will remain closed.

For clear fire viewing, the front door features a large,
self-cleaning glass panel. The front door may be
opened (or even removed) and the optional spark
screen clipped in place for open-fire viewing as well.

Flue Collar

Top Load Door/Griddle

Damper Handle
(not shown)

Griddle Handle

Glass Panel

Front Door

Primary Air Control

Front Door Handle

ST611

Fig. 27 The Resolute Acclaim controls are conveniently
located and easy to use.

Advertising