Marquis MW10 - Manual (Page 10)

CONTENTS:
Packaged with Each EUROMW5 or MW10
Telephone: (Figure 2):
● Base Unit ● Clear Plastic Overlay
● Handset ● Paper Index Card
● 15’ Line Cord ● Instructions
● Coiled Handset Cord ● Optional Wall Mounted Plate
TO PREPARE THE EUROMW10 TELEPHONE FOR USE:
1. Plug one end to the modular handset cord into the modular receptacle on the left side of the unit. Plug the other end of the cord into the
handset receptacle (figure 3).
2. Plug one end of the straight modular telephone line cord into the line jack at the front of the base unit.
3. Plug the other end of the straight line cord directly into an appropriate telephone jack (figure 4).
4. Lift the telephone handset and listen for dial tone to ensure proper connection to the telephone line.
FIGURE 3
FIGURE 2
10
LIN E
FIGURE 4
INSTALLATION
* 0
7
4
8
5
# VOL
9
6
PRESS HERE
RECALL
1 2 3
FOR MESSAGES
REDI AL