Marquis MW10 - Manual (Page 14)

TouchLite
TM
FEATURE PROGRAMMING
Feature Description
TouchLite
tm is a new innovation that integrates the visual message waiting lamp and a speed dial button, all in one. It allows easy access
for guests to retrieve messages. When the message-waiting lamp lights to notify the guest that a message is waiting.
A simple press of the red TouchLite
tm key connects the guest to the message center or front desk. TouchLite tm also adds an additional
memory location to this telephone.
Programming TouchLite
tm
1. Lift the handset.
2. Press the STORE button to enter the programming mode.
3. Press the red TouchLite
tm button where the number is to be stored.
4. Enter the number to be stored using the numeric dial pad. Using the FLASH or PAUSE key to insert a flash or pause in the number
string. A flash or pause is considered as a digit in the digit string.
5. Press the STORE button to store the number at the selected location and to exit programming mode. A short beep should be heard to
indicate a valid entry.
6. Hang up the handset.
Note: if a double beep is heard at any time during the programming, an invalid entry has been entered and the whole process must be
started all over again.
14