MITSUBISHI ELECTRIC T-60 - Manual (Page 87)

-SL5 Interface Option
Communications:
The -SL5 Interface Option allows the T-60 Series to communicate to the Allen
Bradley SLC-500 (DH-485Ô) through the 1747-KE DH-485Ô to RS-232-C
Interface Module. The communications cable is EMERSON EMC’s standard
Null Modem cable (N-MODEM-25-9 for the T-61 and N-MODEM-9-9 for the
T-60 ).
Connections:
The -SL5 Option comes with the proper cable to interface to a 1747-KE
Interface Module. For those who need to change the length of the cable, the
proper connections are shown below:
SLC-500 Setup:
The SLC-500 needs to have a 1747-KE interface module installed in it. If the
processor is a stand-alone type (SLC500), you may have to add a two slot
option rack to add this interface module. Some newer SLC-500’s have a
built-in serial port, this port can be used to gain direct access to SLC-500 by
using the DF1 protocol. This document refers only to the setup and use of the
1747-KE module. Please consult EMERSON EMC for other applications.
Figure 25
T-60 Series to Allen Bradley
1747-KE Module
Communication Connections
PLC Interface Commands PLC Specific Information
79