Motorola SBV5120 - Manual (Page 20)

15 SBV5120 Series VoIP Cable Modem User Guide
Home
X
Exit Print
Introduction Installation Troubleshooting Glossary License
Setting Up a USB Driver in Windows 2000
Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the
USB cable.
1 Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and
Startup for a Single User” on page 7. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
2 Click Next.
3 Be sure “Search for a suitable driver for my device” is selected.
4 Click Next.
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.