Motorola SBV5120 - Manual (Page 22)

17 SBV5120 Series VoIP Cable Modem User Guide
Home
X
Exit Print
Introduction Installation Troubleshooting Glossary License
11 Locate and double-click the NetMotCM.sys file in the CD-ROM root directory. The Files Needed window is
displayed:
12 Click OK. The Found New Hardware Wizard window is displayed:
13 Click Finish to complete the installation.
When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 2000” on
page 22.
If you have any difficulties setting up the USB driver, perform “Removing the USB Driver from Windows 2000” on
page 36 and repeat this procedure.