Marantz MV5100 - Manual (Page 30)

30 Recording
9
Press the STOP 9 button to stop recording.The \ light will
disappear from the display panel.
• If the REC(ord)/OTR button is
pressed while a tape without a
record tab is in the VCR, PROTECT-
ED CASSETTE CANNOT RECORD
will appear on the screen briefly.The
VCR will eject the tape.
• The VCR records in a preset volume.
• If the end of the tape is reached
while recording, the VCR will stop
recording, rewind the tape, then stop.
Details are on page 76.
• While “- - - -” is blinking on the VCR
display panel after insert a tape, the
tape will run for a few seconds to
search for the tape number. Details
are on page 64.
• DSPC may appear briefly on the dis-
play panel when you start a record-
ing. Details are on page 60.
Helpful Hints
1
Turn on the TV and set it to channel 3 or 4, whichever chan-
nel the CH3/CH4 switch on the back of the VCR is set to.
Read and follow the steps below to record a television program.
2
Insert a tape with its record tab intact (details are on page 5) in
the VCR.The power will come on.
3
Press the VCR button.
4
If the VCR light appears on the display panel of the VCR, go to step
5. If the VCR light does not appear, press the VCR/TV but-
ton once.
5
Press the ALT/SPEED button until the desired tape speed
appears on the screen. The VCR will only record in SP or SLP.
Details about tape speed are on pages 41 and 77.
6
Use the CH(annel) 8/9 button or the Number buttons to
select the channel to be recorded.
7
Press the REC(ord)/OTR button to start recording. The \
light will appear on the VCR display panel. If no tape is in the VCR,
NO CASSETTE will appear on the screen briefly.
2
1 Turn on the TV.
Insert a tape.
4
5
7
8
9
3
6
8
To pause the recording (for example, during commer-
cials), press the STILL/SLOW button. The \ M M light will
appear on the display panel.
To resume recording, press the STILL/SLOW button
again. The \ light will appear on the display panel.
10
Press the STOP/ EJECT button on the front panel to
remove the tape. The tape number will be assigned and appears
on the screen. Write the tape number on a label and affix the
label to the tape for the Tape Manager. Details are on page 64-73.
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CH VOL
MENU
TIMER
JOG/SHTL
TURBO
TIMER
AUDIO/
MUTE
SKIP
SEARCH
TAPE
MANAGER
OK/STATUS
- .......... .......... +
CBL/DBS
1 – + * 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 PQRS 8 TUV 9 WXYZ
START STOP DATE
VPS/PDC DAILY
SPEED DBS/SAT
PLAY
REW FF
STOP
WEEKLY
/OTR REC
-
+
-
+
ALT 0 CLEAR
SAT/
REV FWD
MV5100 27-84 7/21/00 10:59 AM Page 30