Marantz MV5100 - Manual (Page 48)

6
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time. The \ light will appear
on the VCR 2 display panel.
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
• Audio and video cables are not
included.
• To stop copying tapes, press the
STOP/EJECT button on VCR 2, then
press the STOP/EJECT button on
VCR 1.
• If you connect the audio and video
or S-video cables to the
AUDIO/VIDEO or AUDIO/S-VIDEO
IN jacks on the front of VCR 2, you
must select A/V IN FRONT at step
4.Then, select VIDEO or S-VIDEO at
FRONT A/V INPUT in the VCR Set
Up menu. If you connect the audio
and video or S-Video cables to the
AUDIO/VIDEO IN or AUDIO/S-
VIDEO IN jacks on the back of VCR
2, you must select A/V IN REAR at
step 4.Then select VIDEO or S-
VIDEO at REAR A/V INPUT in the
VCR Set Up menu.
Helpful Hints
The instructions on this page show you how to copy tapes. Different VCRs may operate differently. To
duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO
or S-VIDEO In jacks on the front of VCR 2 instead if you prefer.)
1
VCR 1 will play your tape. Insert a prerecorded tape in VCR
1. If the tape does not have a record tab, playback begins. If this
happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the VCR power is on and the VCR is in VCR
position. (The VCR light will appear on the display panel. If it does
not, press the VCR/TV button once.)
3
Turn on the TV; set it to channel 3 or 4, whichever channel
the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the VCR button,
then press the Number button 0. Press the CH(annel) 8/9
button so that A/V IN FRONT (for jacks on the front) or A/V IN
REAR (for jacks on the back) appears on the screen.
5
Point the remote control at VCR 2. Press the ALT/SPEED
button to select SP or SLP.
LP 20917-003
IN OUT
S VIDEO
VHF/UHF
IN ANTENNA
OUT TV
CABLE BOX
VIDEO
L
R
AUDIO
(MONO)
OUT IN
LP 20917-003
IN OUT
S VIDEO
VHF/UHF
IN ANTENNA
OUT TV
CABLE BOX
VIDEO
L
R
AUDIO
(MONO)
OUT IN
CH3 CH4 CH3 CH4
1) Use audio cables to connect the
AUDIO OUT Jacks on VCR 1 to the
AUDIO IN Jacks on VCR 2.
2) Use a video cable to connect the
VIDEO OUT Jack on VCR 1 to the
VIDEO IN Jack on VCR 2. (Or, to
improve picture quality, you may connect
an S-Video cable to the S-VIDEO OUT
jack on VCR 1 and to the S-VIDEO IN
jack on VCR 2 instead.
VCR 1
Playing VCR
VCR 2
Recording VCR
3) Use an RF coaxial cable to connect the RF OUT
Jack on VCR 2 to the TV’s ANTENNA IN Jack.
audio cables
video cable
48 Rerecording (Tape Duplication)
S-Video cables
MV5100 27-84 7/21/00 10:59 AM Page 48