Marantz MV5100 - Manual (Page 44)

3
The START time will continue to appear on the display panel. To
set the STOP time, press the PLAY 8 or STOP 9 button.
Every time you press a button, the stop time changes in one-
minute increments. If you press and hold a button, the stop time
changes in 30-minute increments. When the correct STOP
time appears, press the OK/STATUS button.
2-4
1
This function allows you to set a timer recording without using
the on-screen menus. Complete each step within one minute of
the previous step. Use Turbo Timer to set a timer recording within
the next 24 hours only.
1
Insert a tape into the VCR and press the TURBO TIMER
button on the remote control. The current time will appear
on the display panel. (It will not appear on the TV screen.)
If “Err” (error) appears, either the clock is not set or you have set
eight timer recordings already.The VCR will not let you set more
than eight timer recordings.
4
The current channel number will appear on the display panel. To
select the channel you want to record, press the PLAY 8
or STOP 9 button. Every time you press a button, the channel
changes once. If you press and hold the button, the channels will
change rapidly. When the correct channel number appears,
press the OK/STATUS button.
44 Turbo Timer
• The Program Overlap Warning does
not function with Turbo Timer.The timer
recording with the earliest start time
will record.Then, the remaining portion
of the later recording will record.
• To exit Turbo Timer mode at any time,
press the TURBO TIMER button.
• DAILY or WEEKLY timer recordings can
not be set with Turbo Timer.
• Tape speed can be selected at any
time during steps 2-4 by pressing the
ALT/SPEED button.
• If you are using a DBS with the
Controller, and have selected a channel
number which is between 100-199,
you need to specify whether the chan-
nel is for Cable TV or Satellite TV
(DBS). Press the Number 0 (DBS) but-
ton repeatedly to select either the DBS
mode (“D” indicator appears on the
display panel), or CABLE/TV (no indica-
tor display appears next to channel
number) for the proper channel mode.
Helpful Hints
5
The normal display will appear, and the r light will appear on the
display panel.
Press the POWER button to turn off the VCR. Leave the
Cable Box/DBS on if applicable.
2
To set the START time, press the PLAY 8 or STOP 9
button until the desired start time appears on the display
panel. Every time you press a button, the start time changes in
one-minute increments. If you press and hold a button, the start
time changes in 30-minute increments.
When the correct START time appears, press the
OK/STATUS button.
VCR
SLP
VCR
SLP
VCR
SLP
VCR
SLP
1 Insert a tape
into the VCR.
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CH VOL
MENU
TIMER
JOG/SHTL
TURBO
TIMER
AUDIO/
MUTE
SKIP
SEARCH
TAPE
MANAGER
OK/STATUS
- .......... .......... +
CBL/DBS
1 – + * 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 PQRS 8 TUV 9 WXYZ
START STOP DATE
VPS/PDC DAILY
SPEED DBS/SAT
PLAY
REW FF
STOP
WEEKLY
/OTR REC
-
+
-
+
ALT 0 CLEAR
SAT/
REV FWD
MV5100 27-84 7/21/00 10:59 AM Page 44