8 hookups with a cable box/direct broadcast system – Marantz MV5100 User Manual

Page 8

Advertising
background image

CH3

CH4

LP

20917-003

IN

OUT

S VIDEO

VHF/UHF

IN

ANTENNA

OUT

TV

CABLE BOX

VIDEO

L

R

AUDIO

(MONO)

OUT

IN

OUT

IN

S
V

I

D
E
O

75

ANT /

CABLE

OUT

IN

8 Hookups with a Cable Box/Direct Broadcast System

Connections

1

Connect a Cable signal to the IN jack on the Cable Box/DBS.

2

Use an RF coaxial cable (supplied) to connect the OUT jack on the
Cable Box/DBS to the ANTENNA IN jack on the VCR.

3

Use a second RF coaxial cable to connect the TV OUT jack on the
VCR to the TV’s ANTENNA IN jack.

Recording/Viewing Any Channel

1

With the VCR on and in VCR position (the VCR light will appear on
the display panel), use the CH(annel)

8/9 button to set the VCR to

the Cable Box/DBS output channel (channel 03 or 04).

2

Set the TV to the same channel to which you set the VCR. Set the
CH3/CH4 switch on the VCR to the same channel.

3

Select the channel you want to view/record at the Cable Box/DBS.

1

2

There are two ways to connect your Cable Box/DBS to the VCR.With this connection:

You may view any channel.

You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

You may not view a channel other than the one you are recording.

You may not set up channels at the VCR.

You can only program a timer recording for one channel at a time if you are not using the Controller. Set
the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch
to the same channel. Set your Cable Box/DBS to the channel you want to record.When you enter the
channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output
channel). (This is step 3 on page 40.) Leave the Cable Box/DBS on for a timer recording.

To set up the Controller, see pages 50-54.

3

Cable signal

RF coaxial cable

RF coaxial cable

Cable Box/DBS

VCR

TV’s

ANTENNA

IN jack

• If you are using Record Link, use

audio and video cables to connect
the AUDIO/VIDEO OUT jacks on
the Cable Box/DBS to the
AUDIO/VIDEO IN jacks on the back
of the VCR. Details are on page 35.

Helpful Hint

MV5100 04-26 7/21/00 10:58 AM Page 8

Advertising