Marantz MV5100 - Manual (Page 36)

1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program the VCR with your local channel infor-
mation.To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one from your
cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide
or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS and are not using the Controller, the Cable/TV
channel must be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel.
Channels
Station
Call Letters
VCR PLUS+ CH. CABLE/TV CH.
Channels
Station
Call Letters
VCR PLUS+ CH. CABLE/TV CH.
36 Setting Up the VCR Plus+ Programming System
MV5100 27-84 7/21/00 10:59 AM Page 36