Multiquip Control Box Replacement LS60TD - Manual (Page 7)

LS60TD anD LS600 — COnTROL bOX RepLaCemenT — Rev. #1 (03/23/12) — page 7
DigiTaL ReaDOuT SCReenS
primary Screen
Screen 1
Indicates„the„various„modes„of„the„switch„settings.
Monitors„ engine„ RPM„ -„ Idle„ speed„ 900,„ High„ speed„
2550.„Battery„charge„indicator„-„Normal„charge„13+„volts.„
Indicates„electrical„malfunction.
„
Secondary Screens
Screen 2 (not used on model LS60TD)
Displays„the„position„of„the„VOLUME„CONTROL„switch„
by„indicating„whether„the„increase„or„decrease„position„
is„on„or„off.
Screen 3
Displays„ the„ number„ of„ hours„ the„ engine„ and„ pump„
have„been„used„and„the„number„of„faults„the„pump„has„
registered.„All„three„indicators„can„be„reset„to„zero„by„the„
RESET„switch„on„the„control„panel.
Screen 4
Displays„the„number„of„strokes„the„main„hydraulic„cylinders„
have„gone„through.„This„indicator„can„be„reset„to„zero„by„
the„RESET„switch„on„the„control„panel.
FLOW DEC OFF
FLOW INC ON
2
INDICATES VOLUME
SWITCH IS NOT IN
THE - POSITION
INDICATES VOLUME
SWITCH IS IN THE
+ POSITION
E HRS: 00000.0
PMP HRS: 00000.0
FAULTS: 00000000
RESET TO CLEAR
3
INDICATES NO.
OF HOURS
ENGINE HAS
BEEN USED
MESSAGE OR
INSTRUCTION
INDICATES NO.
OF HOURS
PUMP HAS
BEEN USED
INDICATES NO.
OF FAULTS
DETECTED
STROKE CTR: 0000
PRESS RESET TO
ZERO STROKE CTR
4
INDICATES A
RUNNING
COUNT OF
NO. OF STROKES
MESSAGE OR
INFORMATION
Screen 5
Displays„the„ON/OFF„electrical„signal„status„of„the„various„
12„volt„solenoids„(Swing„A„circuit,„Main„A„circuit,„Main„B„
circuit).
Screen 6
Displays„ the„ ON/OFF„ electrical„ signal„ status„ for„ the„
Proximity„ Switch„ A,„ Proximity„ Switch„ B,„ Engine„ Fuel„
Solenoid,„and„Unloader„Solenoid.
Screen 7
Displays„the„number„of„times„the„main„hydraulic„cylinders„
stroke„and„the„yards„per„hour„output.„This„indicator„can„be„
reset„to„zero„by„the„RESET„switch„on„the„control„panel.
Screen 8
Displays„the„electrical„status„of„the„engine„fuel„solenoid.„To„
test„the„12-Volt„solenoid„status,„activate„with„the„RESET„
switch„on„the„control„panel.
Screen 9
Displays„the„communication„status„of„the„(optional)„radio„
remote„control.„To„activate„a„new„remote„control„connection,„„
use„the„reset„switch„on„the„control„panel.
INDICATES
SWING A
CIRCUIT IS OFF
INDICATES
MAIN A
CIRCUIT IS OFF
INDICATES
MAIN B
CIRCUIT IS OFF
SWING A OFF
MAIN A OFF
MAIN B OFF
5
INDICATES
PROXIMITY A
CIRCUIT IS OFF
INDICATES
PROXIMITY B
CIRCUIT IS ON
INDICATES
FUEL SOLENOID
CIRCUIT IS OFF
INDICATES
UNLOADER
CIRCUIT IS OFF
PROX A OFF
PROX B ON
FUEL SOL OFF
UNLOADER OFF
6
INDICATES
THROTTLE
IS ON
INDICATES THE
NUMBER OF
STROKES
INDICATES THE
NO. OF STROKES
PER MINUTE
INDICATES THE
NO. OF YARDS
PER HOUR
THROTTLE ON
STROKES: 20
STROKES/MIN 8.2
YDS/HR 10.7
7
INSTRUCTION
OR MESSAGE
INDICATES THE
FUEL SOLENOID
IS OFF
TO TEST FUEL
SOL PRESS RESET
FUEL SOL OFF
8
INDICATES
THAT RADIO
REMOTE IS ON
IINSTRUCTION
OR MESSAGE
RADIO ADDRESS
COMMUNICATING
PRESS RESET TO
LEARN A NEW ONE
9