Mitsubishi Motors 6A1 - Manual (Page 31)

6A1 ENGINE (E - W) - Ignition System
11A-6-2
REMOVAL AND INSTALLATION <MIVEC>
1
2
3
25 Nm
1.0 Nm
Removal steps
1. Spark plug cable
2. Ignition coil
3. Spark plug
INSTALLATION SERVICE POINT
"
A
A
DISTRIBUTOR INSTALLATION
(1) Turn the crankshaft clockwise to bring the No. 1 cylinder
piston to the compression stroke top dead center.
(2) Align the mark on the distributor housing with the mark
on the coupling.
(3) Install the distributor while aligning the coupling key with
the keyway in the camshaft end.
PWEE9622
E
Feb. 1997 Mitsubishi Motors Corporation
6AE0151
Alignment mark