6a1 engine (e - w), Removal service point, Installation service points – Mitsubishi Motors 6A1 User Manual
Page 62
6A1 ENGINE (E - W) -
Oil Pump Case and Oil Pan
11A-13-3
REMOVAL SERVICE POINT
A
A
"
OIL PAN REMOVAL
(1) Knock the special tool deeply between the oil pan and
the cylinder block.
(2) Hitting the side of the special tool, slide the special tool
along the oil pan to remove it.
INSTALLATION SERVICE POINTS
"
A
A
INNER ROTOR / OUTER ROTOR INSTALLATION
(1) Apply engine oil to the rotors. Then, install the rotors
ensuring that the alignment dots made at disassembly
are properly aligned.
"
B
A
SEALANT APPLICATION TO OIL PUMP CASE
Specified sealant:
Mitsubishi
Genuine
Part
No.
MD970389
or
equivalent
"
C
A
OIL SEAL INSTALLATION
(1) Apply engine oil to the oil seal lip.
Using the special tool, knock the oil seal into the oil pump
case.
PWEE9622
E
Feb. 1997
Mitsubishi Motors Corporation
6AE0087
MD998727
6AE0091
6AE0092
3 mm diameter
bead sealant
6AE0093
MD998717