Meyer Sound CueMixer Matrix3 - Manual (Page 7)

CueMixer Setup
Connecting the CueMixer 7
The CueMixer™ is a physical control surface for the Matrix3™ audio show control system. The faders and buttons
provide a flexible interface for controlling audio processing and automation within the Matrix3.
Connecting the CueMixer
Power is suppled to the MS-CUEMIXER from an external +12VDC/2.5A power supply (included.)
Data is RS-422 and is connected to Port B of the LX-COS module in an MS-LX300 Matrix3 Primary Processor using
the supplied cable (DB-9 male to DB9 male). Only one CueMixer can be connected to a Matrix3 Primary Processor.
The default port is B, but you can change that to port A using an CueStation software.
The data rate for the CueMixer is 38.4K baud.
The data connector on the CueMixer is a DB-9 female.
7