Metz Plasma-TV-Set - Manual (Page 32)

32
Opening the menu 15. Childlock
b) Permitted programmes:
Activate the childlock as described in step a).
Use the corresponding numeric key to select the
menu item "Permitted xx progs." (xx = TV, radio
or AV). Press the "OK" key and, in the
setting window, enter the programme
positions with the numeric keys or use
the - + key to select the desired pro-
gramme positions.
• Press the "OK" key to save the new
settings.
c) TV start – TV end
Activate the childlock as described in
step a). In the setting window, use the
cursor control key to select the start and
end times and enter the desired times
with the numeric keys. Press the "OK"
key to save the settings.
Protecting the childlock settings with
your code
• Use the cursor control key to select "Code" and
enter your personal code (password) with the
numeric keys.
Make a note of this code, since the child
lock can be deactivated only if the correct
code is entered !
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
• Switch off the TV set with the
key.
The childlock is not fully activated until the
TV set is switched off.
Deactivating the childlock
If the childlock is active, a window requesting your
personal code is displayed each time the TV set is
switched on. Entering the correct code enables the
TV set and it can then be used normally until it is
switched off again. To cancel the childlock func-
tion, proceed as described in step a), above, and
set the childlock to "Inactive".
☞
☞
Ä
Factor
y setting
Code: 0000
✂
Permitted AV prog.
Permitted radio prog.
Permitted TV prog.
Settings
Recording control
Timer setting
Timer control
Reminder
Childlock
Prog A Kabel 1 Prog B -----
Prog C ----- Prog D -----
Prog E ----- Prog F -----
Enter programme
position and save
with
clear.
OK
I I
605 47 2029.A2 LCD-GB 10.03.2006 8:52 Uhr Seite 32