Metz Plasma-TV-Set - Manual (Page 97)

97
"DiSEqC" makes it possible to control the satel-
lite antenna digitally via the existing antenna
cable and is a prerequisite for the reception of
signals from more than two satellites (e.g.
Astra, Eutelsat, Hotbird).
If you wish to receive signals from at least three
satellites (e.g. ASTRA 19.2°, Eutelsat 16°, Hot-
bird 13°) the antenna system can be controlled
only with the aid of "DiSEqC".
This menu item is not available in a 2**
menu.
Switching DiSEqC on and off
• Press the MENU key to open the TV
menu.
• Press the red key to open the menu
"Configuration".
• Press the appropriate numeric key (in
this example ᕥ to select "DVB-S".
• Use the cursor control key to select
"DiSEqC system" and press the OK
key to confirm the selection. The cur-
sor is now located in front of "DiSEqC
system" in the setting window.
• Use the - + to select "Yes" or "No".
• Press the OK key to confirm the new setting.
• Press the EXIT key to close the TV menu.
☞
A1.1 Set-up of satellite system
DiSEqC system
i
Calling the menu
MENU
ᕥ
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
EXIT
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
DiSEqC system on
Change with
Accept value with
F1 ➔
OK
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 97