Metz Plasma-TV-Set - Manual (Page 38)

38
18. Special Functions
Picture-in-Picture
Opening the menu
On TV sets equipped with only one tuner, the pic-
ture-in-picture (PIP) function can only be used to
display the picture from an AV device.
On TV sets with two tuners, the picture from anot-
her station or from an AV device can
be displayed.
Activating the PIP function
• The F1 key is pre-programmed with
the picture-in-picture function.
• You can use the cursor control keys
̇ ̈ to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can
set the frame of the PIP picture to
active (red) or inactive (white).
• The contents of the PIP picture can be changed
only if its frame is active (red). If this is the case,
you can use the numeric keys or the "P+/P-"
rocker key to select a different AV programme
position.
If you wish to display the picture from a connected
AV device as a picture-in-picture, press the "AV"
key and then use the numeric keys to select the
desired AV device.
If you wish to display the picture from another sta-
tion, use the numeric keys to select the desired
programme position.
• Pressing the red key
swaps the contents of
the two pictures.
• Pressing the green key causes the PIP picture
to expand to fill the screen and terminates the
PIP function.
• To close the PIP picture, press the "EXIT" key.
If a recording has been programmed in the
timer menu, activating the PIP function
displays the programme which is being
recorded.
☞
F1
EXIT
605 47 2029.A2 LCD-GB 10.03.2006 8:52 Uhr Seite 38