Metz Plasma-TV-Set - Manual (Page 6)

6
Ǽ ³
ባ
ቤ
ቶ
k
ᕤ
ᕥ
ቧ
ቨ
ᕨ
ቫ
ቪ
ቭ
ቮ
ቯ
ተ
ቲ
ƺ
Ƽ
ት
ቴ
The remote control sends commands to
the TV set by means of an infrared sig-
nal. You must point it towards the TV set
when using it. Note that the remote con-
trol may interfere with the operation of
other devices which use infrared signals
(such as infrared headphones).
Sunlight falling directly on the TV set
may interfere with the operation of the
remote control, since the TV set cannot
detect the infrared signals from the
remote control under these conditions.
The TV set must be switched on with the
main power switch before it can be con-
trolled with the remote control.
The most important keys
for normal use
³ ON
Switches the TV set on with program-
me position 1 or the programmed
initial programme position selected,
or switches it OFF (to the standby sta-
te).
ᕤ Numeric keys (direct station selection).
ᕥ P+ /P- Selects the next/previous pro-
gramme position.
ᕨ Volume control.
Setting can be changed in the menu.
ƺ Back to the previously selected
station.
Ƽ Displays the station table.
3. The Remote Control
Do not insert rechargeable batteries in
the battery compartment of the remo-
te control.
Use only two dry batteries of the type
LR03/ AM4/AAA 1.5V.
21
k
22
605 47 2029.A2 LCD-GB 10.03.2006 8:52 Uhr Seite 6