Minolta DiMAGE Scan Multi PRO AF-5000 - Manual (Page 34)

34
Removing a Film
While pressing the button on the lower side of the attachment,
lift the film cover.
Removing an Attachment
While sliding the lever on the middle part of the holder to the
right, lift the attachment.
4. Place a film on the mask with the
emulsion side down while aligning
the lower side of the film with the
film guide (at the upper or lower
side).
5. Close the film cover of the holder
until it clicks.
LOADING THE FILM HOLDER
NOTE:
• Be sure to fit the appropriate mask
before inserting the film in the scanner.
Otherwise, interference fringes with the
concentric circles-patterns may appear
on the image after the scanning is
performed.