Minolta DiMAGE Scan Multi PRO AF-5000 - Manual (Page 79)

DiMAGE Scan Multi PRO
79
Amount:
If you adjust the slider to increase (to the right), Pixels increasing the level
of contrast will become larger. If you increase the value too much, Pixelation
(the Pixels image becoming noticeably rough) will occur. Normally, we
recommend 150 to 200% for highly processed print images.
Radius:
If you adjust the slide to increase (to the right) or input a value, the edge of
the Pixel will become sharper. Set it to determine how the sharpening effect
is extended around each pixel. Normally, we recommend 1 to 2 for highly
processed print images. This alteration cannot be recognized much on a
print as it will be on the screen.
Threshold level:
If the difference between the surrounding pixels is greater than that of the
threshold level, that pixel is recognized as a requiring sharpening. This
restricts the effect to places where it is reduced.
Dark Part Protection level:
This limits the sharpening effect, so that only pixels whose light level is
greater then the selected level are sharpened.
RESET
If you click [Reset] button, the settings in the current correction
window are reset.
UNSHARP MASK