Mace DVR-9404 User Manual
Page 115
Chapter 7 WebCam System
Change Server
The Change Server function allows you to change connection to a different GV-System.
Click on the [Change Server] button and the following dialog box will appear.
1. Click [New] button to create a new connection.
2. Enter a name for the new connection in the “Host” column.
3. Enter a valid user ID and passwords.
4. Enter the IP address of the GV-System you wish to connect to.
5. Specify port number in both Command Port and Data Port.
6. Click [OK] to establish connection to the server. This new connection will now be listed in
the “Host” drop-down list.
7. To remove the connection simply selected from the “Host” drop-down list and click the
[Delete] button.
Snapshot
Click on the [Snapshot] button and you will be able to capture an image from the video clip.
Click [Print] button to print snapshot image to a printer or [Save] button to save the image as
*bmp file.
Page 110
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE