Mace DVR-9404 - Manual (Page 88)

Chapter 6 Remote Monitoring System
Remote PTZ and I/O Function
If you have installed PTZ or I/O devices on the connected GV-System, then you will be able to
control these devices over TCP/IP or dial-up network.
Remote PTZ control
Select [View] > [PTZ Device] from the menu bar and the PTZ control panel will appear. Use
the [PTZ select] buttons to choose the type of camera you wish to control. The control
panel’s user interface may vary from models to models.
PTZ select button
Direction control button
Zoom
Focus
Auto Focus
Auto Pan
PTZ speed select
ID address select
Remote I/O control
Select [View] > [I/O Module] from the menu bar and the I/O control panel will appear. The
Remote view application allows you to control the output devices only. Click on the [Output
signal] buttons to send signal to the output device.
Output signal buttons
Page 83
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE