Mace DVR-9404 - Manual (Page 34)

Chapter 3 Main System Application
[PTZ Control]
The PTZ Control allows you to setup installed PTZ cameras. Select the make and models in
the drop down list menu and click the PTZ setup button to activate it. If you cannot find your
PTZ camera within the drop down list then most likely its not supported by the GV-System.
[Monitor Option]
Specify how many seconds to delay monitoring function after system startup.
Start Delay: Enable this function and the system will delay the recording for a preset
time after an alarm.
Motion Post Rec: Enable this function and the system can be recorded for a preset
time after an alarm.
Video Lost/IO Error Alerts: Enable this function and the system will send Email or
Hotline alerts to notify you if your camera or I/O device lost signals.
[Event Log Size]
Allow you to select the length of each event log from 1 to 5 minutes. If you select 5 minutes
then a 30 minutes video clip will break into six 5 minutes files.
Page 29
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE