Mace DVR-9404 - Manual (Page 116)

Chapter 7 WebCam System
File Save
Click on [File Save] button and you will be able to save video clip in *avi format.
PTZ Control
Click on the [PTZ Control] button and the following PTZ panel will appear. PTZ cameras only
allow one user to control at a time. Therefore, if there are several users trying to control the
same PTZ camera in the same time, the camera will give priority to the first login user and to
the next in the orders received. Each user will be given 60 seconds to control the camera.
After the time expired, the system will switch the control to the next user in queue. The
counter on the upper right corner serves two meanings, for user who is controlling the camera
it indicates the remaining time of your control. For user who is waiting online it indicates the
total waiting time.
I/O Control
Click on the I/O control button to bring out the following I/O control panel. The I/O control
panel allows you to send signal to the output device over the Internet.
Click on [Start Control] button; use the drop-down list to select the module you wish to control.
Then click on one of the [Output] button to send signal to the device.
Page 111
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE