2start webcam system – Mace DVR-9404 User Manual
Page 112
Chapter 7 WebCam System
7.2 Start WebCam System
After you have properly setup GV-System’s Webcam server it will be ready to send video stream
over the Internet. There are four functions available for Webcam System, which are Mpeg4
Encoder Viewer, JPEG Image Viewer, Remote Play Back, and Server Information. This section
will explain each function in detail.
7.2.1 Mpeg4 Encoder Viewer
The Mpeg4 Encoder Viewer is the most powerful remote monitoring option in the WebCam
System. It basically run within the Internet Explorer and is capable of receiving live video
stream from the GV-Systems over the Internet.
Start and Stop Mpeg4 Encoder Viewer
1.
Run Internet Browser from your PC.
2.
Key in GV-System’s IP address in the browser’s address box then press [Enter].
3.
Select “Mpeg4 Encoder Viewer” and then click [Submit].
4.
Select “MODEM” if you are using modem dial-up connection or “DSL/CABLE/T-1” if you
are using a broadband TCP/IP connection.
Page 107
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE