Mace DVR-9404 - Manual (Page 131)

Chapter 7 WebCam System
C: Click OK and the status window should display the date, time, and the connection status.
4. If the connection between GV-Server and Geo-Server is establish successfully, you’ll be able to
see a DMIP icon located in the lower left corner of the Window status bar.
Setup DMIP server
However, if you would like to build up your own DMIP server, please refer to the following
instructions to set it up:
1. Execute the IIS server 5.0 embedded in the Windows 2000 Server.
2. Build up a FTP server and allow the “Write” function.
3. Build up a Webserver and specify the path to the one which the FTP server specified.
Remember, the access with “Write” is not allowed to be activated.
Note If necessary, you may also write a homepage for your own DMIP server.
Page 126
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE