Mace DVR-9404 - Manual (Page 27)

Chapter 3 Main System Application
Step Two: Specify monitor invoke options
Rec: Click on the Rec option to enable or disable recording function.
Recording Mode: Use the drop-down menu to choose between Round-the-clock
recording mode or Motion-detect recording mode. Round-the clock mode applies full
time recording during the schedule period while Motion-detect mode records only when
motions are detected.
Pager/E-mail: Click on the Pager/E-mail option to enable or disable Hotline Alerts
during the surveillance schedule. The Hotline Notice will send alerts to users by pager
or email when motion detector or I/O sensor are trigger.
Output: Click on the Output option to enable or disable sending output signals to the
output pin during the surveillance schedule. This option requires the optional GV-IO
hardware.
Step Three: Set remote function
View: Click on the view option to enable or disable remote view function during the
surveillance schedule.
Center: Click on the center option to enable or disable sending pictures to
GeoCenter.
Step Four: Camera select
Select cameras you wish to be used during the surveillance schedule.
Step Five: Day Select
Select the days you with to be included in the weekly schedule. For example, if you
wish to apply this schedule from Monday to Friday, simply select them by push down
each day’s button.
Page 22
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE