Mace DVR-9404 - Manual (Page 32)

Chapter 3 Main System Application
[Start Up]
In Startup area you can choose which functions you wish to enable when starting up your
GV-System. Click on the check box before each function to enable and uncheck it to disable.
Start Monitor: If this function is enabled the system will automatically start monitoring when
starting up GV-System. There are 3 monitor options available…
Monitor All: If this option is selected the system will initiate recording on all
cameras after startup.
Schedule Monitor: If this option is selected the system will start your surveillance
schedule after startup.
I/O Monitor: If this option is selected, after startup the system will initiate
monitoring based on the I/O device setup.
Network Server: Choose which network server you would like to enable after system startup.
The network server includes: Multicast Server, TCP/IP Server, Webcam Server, Modem
Server and Connect to Center.
Full Screen Mode: If this option is enable then your system will be able to switch to full
screen mode. However, your VGA card will need to support direct draw overlay to use this
function.
Startup Auto Login: Click to enable auto login function. Click on the arrow icon and the
following dialog will appear. Enter the ID and passwords of the account you wish to use for
auto logon. You can also specify whether to login in full screen mode or in normal mode.
Page 27
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE