Moxa Technologies EDS-518A Series - Manual (Page 24)

EDS-518A Series User’s Manual Featured Functions
3-9
Time Server IP/Name
Setting Description Factory Default
1st Time Server IP/Name IP or Domain address (e.g., 192.168.1.1 or
time.stdtime.gov.tw or time.nist.gov).
2nd Time Server IP/Name
EDS-518A will try to locate the 2nd NTP
Server if the 1st NTP Server fails to connect.
None
Time Server Query Period
Setting Description Factory Default
Query Period This parameter determines how frequently the
time is updated from the NTP server. 600 seconds
System File Update—By Remote TFTP
MOXA EDS-518A supports saving your configuration file to a remote TFTP server or local host
to allow other EDS-518A switches to use the same configuration at a later time, or saving the Log
file for future reference. Loading pre-saved firmware or a configuration file from the TFTP server
or local host is also supported for easy upgrading or configuration of EDS-518A.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of TFTP
Server The IP or name of the remote TFTP server. Must be
set up before downloading or uploading files. None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of EDS-518A’s
configuration file in the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of EDS-518A’s firmware
file.
None