Moxa Technologies EDS-518A Series - Manual (Page 78)

EDS-518A Series User’s Manual Featured Functions
3-63
Bootup This field shows how many times the EDS-518A has been rebooted or cold started.
Date The date is updated based on how the current date is set in the “Basic Setting” page.
Time The time is updated based on how the current time is set in the “Basic Setting” page.
System
Startup
Time The system startup time related to this event.
Events Events that have occurred.
NOTE The following events will be record into EDS-518A’s Event Log table:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off Æ On), Power 1/2 transition (On Æ Off)
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off Æ On), DI 1/2 transition (On Æ Off)
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
Using HTTPS/SSL
To secure your HTTP access, EDS-518A supports HTTPS/SSL to encrypt all HTTP traffic.
Perform the following steps to access EDS-518A’s web browser interface via HTTPS/SSL.
1. Open Internet Explorer and type https://EDS-518A’s IP address in the address field. Press
Enter to establish the connection.
2. Warning messages will pop out to warn the user that the security certificate was issued by a
company they have not chosen to trust.