Monarch Instrument 9403TM - Manual (Page 11)

C o n n e c t i n g t h e P o w e r C a b l e
To connect the power cable:
CAUTION
The power switch must be off while you connect any
cables to the printer.
The scanner port is not active.
1. Plug the power cable into the socket. Plug the other end of
the cable into a grounded electrical outlet.
2. Turn on the printer. Press (I) to turn on and (O) to turn off the
printer.
Power
Switch
Communication
Port
Scanner
Port
Getting Started 1-3