Motorola DS3478 - Manual (Page 101)

RS-232 Interface 7 - 3
RS-232 Default Parameters
Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the parameter descriptions section beginning on page 7-4 .
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 7-1 RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232 7-6
Baud Rate 9600 7-7
Parity None 7-9
Check Receive Errors Enable 7-10
Stop Bit Select 1 Stop Bit 7-10
Data Bits 8-Bit 7-11
Hardware Handshaking None 7-11
Software Handshaking None 7-13
Host Serial Response Time-out Minimum: 2 sec 7-15
RTS Line State Host: Low RTS 7-16
Beep on <BEL> Disable 7-11
Intercharacter Delay Minimum: 0 msec 7-17
Nixdorf Beep/LED Options Normal Operation 7-18
Ignore Unknown Characters Send Bar Code 7-19