Digital scanning, Digital scanning -6 – Motorola DS3478 User Manual
Page 36
2 - 6
Symbol DS3478 Product Reference Guide
Digital Scanning
to install and program the digital scanner. Also see
for
DS3478-DP (DPM) digital scanning. To scan:
1.
Aim the digital scanner at the bar code.
2.
Press the scan trigger.
Figure 2-2
Aiming the Digital Scanner
The digital scanner projects a red laser aiming pattern which allows positioning the bar code or object within
the field of view.
Figure 2-3
Laser Aiming Pattern
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
3.
Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the
rectangular area formed by the brackets in the pattern.
Figure 2-4
Centering Symbol in Aiming Pattern
1D bar code symbol
2D bar code symbol
2D dot peen DPM symbol
Aiming Pattern