Dca-600ssk — pre-setup – Multiquip DCA-600SSK User Manual

Page 42

Advertising
background image

PAGE 42 — DCA-600SSK — OPERATION AND PARTS MANUAL (STD) — REV. #7 (04/30/10)

DCA-600SSK — PRE-SETUP

3.

NEVER overfill trailer fuel tank – It is important to
read the trailer fuel gauge when filling trailer fuel tank.
DO NOT wait for fuel to rise in filler neck. See Figure 35.

Figure 35. Full Trailer Tank

Figure 36. Filling Secondary Internal Fuel Tank

Figure 38. Fuel Expansion

DO NOT OVER-FILL fuel system. Leave room for fuel
expansion . Fuel expands when heated (Figure 36).

4.

Once the trailer tank is full, the

secondary inner tank

can be filled (See Figure 36). Notice how the trailer
filler tube level rises when the internal tank is filled.

5.

Figure 37 below reflects a full fuel system.

6.

Fuel from the engine return line will drain into the secondary
internal fuel tank. This fuel will eventually drain into the
primary trailer tank in order to return to the engine.

Figure 37. Full Fuel System

CAUTION - REFUELING THE GENERATOR

It is recommended to only fill the internal secondary take to 3/
4 full in order to allow for fuel return, fuel expansion, and to
avoid spillage. See Figure 38 for fuel expansion.

CAUTION - REFUELING SECONDARY FUEL TANK

Advertising