Middleby Marshall PS360WB EN - Manual (Page 16)

2-10
SECTION 2
INSTALLATION
Figure 2-23
Outside Master
Links
Direction
of travel
4. Connect the outside master links. Note that the
outside master links have right and left sides. The
right-side master link has an open hook facing you, as
shown in Figure 2-23.
2. Slide the conveyor belt through the support rods
underneath the frame, and thread it through the oven.
Then, reach through the oven window and pull the free
end of the belt through the oven so that it lies atop the
conveyor frame.
After the belt has been pulled through the oven, check
the following:
• The conveyor belt links must be oriented as shown
in Figure 2-21.
• The smooth side of the conveyor belt must face
UP.
3. Connect the inside master links. Check that the links
are oriented as shown in Figure 2-22.
Figure 2-21 - Conveyor Link Orientation
Figure 2-22 - Inside Master Links
Direction
of travel
Correct
position
Incorrect
position