Miele CVA 4068 - Manual (Page 27)

Temperature
Three temperature settings are
available for each coffee beverage and
two settings for hot water.
Not every coffee type allows high
temperatures. Some types react so
sensitively that the crema cannot be
properly built.
^ Select "Settings
F", and confirm with
OK.
Settings
Temperature
Automatic rinsing
^ Tap < or > until "Temperature" is
highlighted, confirm with OK.
^ Tap < or > until the beverage is
highlighted in which you wish to set
the temperature for. Confirm with OK.
^ Tap < or > until the desired
temperature is highlighted.
^ Tap OK to save the setting.
Automatic rinsing
It is important to flush out any residual
coffee from the lines when starting to
use the machine for the day. If the auto-
matic rinse function is activated and the
machine is cold, the rinse cycle will
begin automatically as soon as the
machine is turned on. This will also
pre-heat the lines with the hot water
used during the rinse cycle. This is
indicated by a message in the display.
If a beverage has already been made,
the machine will also automatically run
a rinse cycle just before turning off.
The factory default setting for the
automatic rinse function is On.
If you do not want the rinse water to
collect in the drip tray, always place an
empty cup or the small cleaning
container underneath the main
dispenser.
^ Select "Settings F", confirm with OK.
Settings
Automatic rinsing
Steam system
^ Tap < or > until "Automatic rinsing" is
highlighted, confirm with OK.
^ Tap < or > to select "On" or "Off",
confirm with OK.
It is recommended that you set this
program option to "On" to ensure
that the rinse cycle will not be
forgotten.
Settings
27