Miele CVA 4068 - Manual (Page 33)

Restoring factory default
settings
The "Factory default" setting can be
used to reset different settings back to
their original default status.
You can select whether to reset all
settings to the factory default or delete
any user profiles.
^ Select "Settings
F", confirm with OK.
Settings
Factory default
Back #
^ Tap < or > until "Factory default" is
highlighted, confirm with OK.
Two options are now available:
User profiles
Selecting "User profiles" deletes all user
profiles that you have entered, leaving
only the default (standard) profile.
^ Under "User profiles", select "Reset",
confirm with OK.
The user profiles are deleted.
All settings
Selecting "All settings" restores all
settings back to the factory default.
^ Under "All settings", select "Reset",
confirm with OK.
All settings are now reset to the default.
Factory default settings
– Amount of coffee (medium)
– Temperatures for coffee beverages
and hot water (medium for both)
– Pre-brewing (without)
– Automatic rinse and steam system
(both On)
– Showroom program (Off)
– Time display (On for 60 seconds),
Time format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00),
("Switch on at" and "Switch off at"
both deactivated)
– Coffee jug (3 cups)
– Lighting: Brightness (medium)
– Safety: System lock (Off)
– Water hardness (very hard 4)
– Display: Contrast (medium),
Brightness (maximum)
– Volume: Buzzer tones and keypad
tone (both at maximum setting)
– User profile: Revert (when machine is
turned on)
If "Reset" is selected by accident,
turn the machine off, the settings will
not be reset.
Settings
33