Miele CVA 4068 - Manual (Page 58)

Instead of coffee only water is dispensed.
Possible fault Solution
– The beans may have gotten stuck.
– The ground coffee funnel cover was
opened and closed and a
preparation with ground coffee was
selected but no ground coffee was
inserted.
The coffee system switches
automatically back to bean use after
preparation.
– Pull the bean container out and push
it back in.
The drip tray is empty but a message to empty it is displayed.
Possible fault Solution
– The metal contacts are soiled or wet.
– Check if the drip tray is inserted
correctly.
– Clean and dry the contacts.
– Insert the drip tray as described in
"Cleaning and Care - Drip tray".
– Turn the machine off and on again
with the main switch.
– If the message still appears contact
Technical Service.
The machine does not rinse when turned on although the automatic rinse
feature is set to "On".
When the machine is still at a temperature of about 140°F (60°C). The machine
will not rinse when it is too hot.
The water (or milk) dispensing stops when programming the serving size.
Possible fault Solution
– There was not enough water in the
tank or milk in the milk container. The
dispensed amount will not be saved.
– If the maximum amount is
dispensed, the flow stops
automatically. The maximum amount
is saved.
– Fill the water tank or milk container
before programming the serving
size.
Frequently asked questions
58