Miele CVA 4068 - Manual (Page 56)

What if the machine does not switch on, even though the "Switch on at"
timer setting is activated?
Possible fault Solution
The System Lock is activated. See "Settings - System Lock".
The display messages are difficult to read.
Possible fault Solution
The contrast or brightness of the
displays are too low / high. Adjust the display contrast / brightness.
See "Settings - Display".
No milk or milk froth comes out of the main dispenser.
Possible fault Solution
The dispenser is clogged.
See "Cleaning and Care".
The display prompts me to fill or insert the stainless steel milk container
even though the container has already been filled and inserted
Possible fault Solution
The container needs to be
cleaned. See "Cleaning and Care".
The grinding sounds louder than usual.
Possible fault Solution
There could be pebbles within
the coffee beans. – Turn off the unit immediately.
– Contact the Miele's Tech. Service if the
bean container is not empty. Otherwise fill
the container with fresh beans.
The coffee/espresso flows too fast into the cup.
Possible fault Solution
The grind control is set too
coarse. Set the grind control slide to a finer grind.
The coffee/espresso flows too slow into the cup.
Possible fault Solution
The grind control is set too fine. Set the grind control slide to a coarser grind.
Frequently asked questions
56